Red / Green / Blue PCB Flexible LED Strip Light for Architectural Decorative Lighting

Quick Detail:

RGB led strip light

LED Chip:  5050 SMD TOP LED

LED Quantity: 30pcs/meter, total 150pcs

Description:

• 5050 RGB SMD LED (Epistar chip) adopted
• RGB color changing with remote controller
• DC 12V or 24V for choice
• High luminance efficient and low power consumption
• Easy Installation, 3M self adhesive tape in backside
• The flexible LED strip can be divided by every three leds
• Up to 50000 hours long life time
• CE RoHS approval
• 2~3 Years Warranty 

Specifications:

US-F5050RGB-30N

Dimension: 5000*10*2mm
LED Chip:  5050 SMD TOP LED
LED Quantity: 30pcs/meter, total 150pcs
Material: FPC
FPC color: Yellow, White, Black

Emitting color: Red, Yellow, Blue, Green, White, RGB colors
Working Voltage: DC12V / DC24V
Rated Power: 7.2W/m

Life Span: ≥50000 hrs,

Beam Angle: >120°
Working Humidity: 10%~95%
Protection Degree: IP33

Working Temperature: -25~55
Packaging: 5m/roll

3528 SMD LED Strip dimension (unit: mm)

ACCESSORIES:

We provided T1 and T2 type 2pcs for single color series non-waterproof light strip each reel. (For free)
Wiring connector — wire length 20cm

Strip Connection:

Connectors are necessary if you want to connect the cut sections together or connect a section to power. (Connector of strip to strip and connector of strip to power are both available)

1. Cut along the mark line, tear a little bit 3M tape from the mark. If 3M tape is not peeled off a little, it will be not easy to insert the strip into the connector.
2. Pull the black plastic lock out from the connector, insert strip.
3. Make sure the soldering pads fully touch the conjunction metal.
4. Push the plastic lock back towards the middle in the lock position.
5. Do not use too much strength while pulling the plastic lock, otherwise it can destroy the connector.

Notes for flexible LED strip mounting:

1. Please make sure that the back-surface of SMD LED ribbons are clean and dry. Dirt, oil, silicon oil, etc.
2. Make sure that the adhesive backing is removed completely to guarantee perfect mounting.
3. After the SMD LED ribbon is well-positioned, press the strip with an appropriate force.

Installation:

 Mr. lei

Tel: 86-571-7642499

Contact to this supplier